163 Penn Avenue, Dover, NJ 07801, USA

amer-banner

For nearly 25 years Amera-Seiki has supplied high-quality Machine Tools to customers across North America. With close to 3000 installations under our belt and a 90% repeat customer rate, Amera-Seiki proves to be the trusted and respected name for machine tools. We also provide the experience and professional services you need when using machine tools in your operation.

Designed to take up where conventional vertical machining centers leave off. 5x's the rigidity and 51 " of Y Axis travel means a smaller footprint and higher output for demanding CNC machining needs. Exclusively available from Amera-Seiki.

VCB-1837-150x150

Amera-Seiki 1725 Hawkeye Dr Hiawatha, IA 52233 Phone: 319-730-0310

47 Beverly Street, Randolph, NJ 07869, USA

logo

The J.F. Berns Company manufactures high quality CNC Lathe and Bar Feeding accessories to increase your machining productivity. Products include spindle liners, bar chamfering machines, bar supports, spindle stops, draw tubes, draw bars, spindle extensions and special loaders and unloaders.

The Bar Champ is a manual bar chamfering machine used to chamfer bars for many different applications. The rugged heavy duty proven design uses 2" thick steel plates to ensure chatter-free operation. From light de-bur chamfers to heavy cuts on hard materials, the Bar Champ just works!

  • No hydraulics!
  • No change parts!
  • Holds concentricity when diameter vary!
  • Extremely fast changeovers!

img_cham_3

JF Berns Company, Inc.
11115 Ashburn Rd.
Cincinnati, OH 45240
513-851-4600
info@jfberns.com

46 Hope Rd, Great Meadows, NJ 07838, USA

LOGO-web

Phase-A-Matic, Inc. product lines began in 1965 and continued to grow. Since then we have logged a huge technical database of our applied converter applications on every type of machine and thousands of brands and models. We offer this knowledge and expertise to those who come to us for help for their 3-phase solutions.

Phase converters are used when three-phase lines are not available or are cost prohibitive. Run virtually any three-phase machine at any single-phase location. Our development of phase converter technology produces the required power for CNC and other voltage-sensitive equipment. Installing a phase converter system has great benefits:

· You own your 3-phase power source / portable / great resale value · No 3-phase utility power line installation charges · No 3-phase charge for every start-up load or monthly service fee

We look forward to working with you.

VS-2

Click Here to Watch Video

PHASE-A-MATIC, INC.
39360 3rd St. East, Suite 301
Palmdale, CA 93550
800-962-6976

Seasons Glen Drive, Morris Plains, NJ 07950, USA

Customer Service is our number one priority. We understand that machine downtime must be kept to a minimum. Our technical support team will work with you to get your machine up and running quickly. With online manuals, high quality videos, expert advice and experience, we can assist you with restoring your machine to its fullest capabilities in a timely manner, so you can get the machine back into production.

Tired of throwing your machining center away the minute your lease payment is up? Step up to a Kent CNC Vertical Machining Center today! Our full line of precision Vertical Machining Center offers a wide selection of rigid and powerful machines for every application. From Compact models for the most efficient use of floor space, standard #40 and # 50 taper models in linear and box-way designs, to models with traveling column or double column designs, there is a Kent CNC Vertical Machining Center to help you get things done more efficiently, economically, and stay competitive over time. Other specialty models include compact 5-axis machining center with rotary table style or trunnion style designs and high speed drill/tap centers.

Kentcnc-5-Axis-Vertical-Machining-Centers

Contact Us
1231 Edinger Avenue
Tustin, CA 92780
Phone: 714-258-8526
Fax: 714-258-8530
Email: info@kentusa.com

200 Gates Road, Little Ferry, NJ 07643, USA

header

Since 1964, Linders Specialty, Co. has been providing custom metal fabrication services to OEM's, metal fabricators and artists all over the United States. Our capabilities in specialty metal forming and fabricating make us the perfect partner to support you in your most difficult projects. Let us help you with our experience in mild steel, stainless steel and other high nickel content alloys, brass, bronze or aluminum. If it's rings or railings, framing or fenders, parts or complete, we can help!

If your project or product requires metal fabrication services, you've come to the right place. Linders Specialty, Co. offers a full service shop, capable of creating what you desire; from raw metal, to a product ready for finishing.

Our wide range of machining capabilities allows Linders Specialty, Co. to offer custom fabrication of one of our signature products: the LCV2000 Coping Machine. Working within a standard design, we build these machines to your required specifications to suit any need. Our engineers make full use of our available in-house machinery, and work with you to ensure that your requirements are precisely met.

The LVC2000 Coping Machine is used to cope to precision measurements for a seamless fit between pieces for products like tubing for railing, components of race car chassis, motorcycle frames, furniture, and railing for yachts. Our copers are available with belt widths from 3" to 6", with a belt length of 132". Roller diameters are available in all sizes between 0.750" and 5", with special constructions available for diameters up to 8". Interchangeable spindles are also available in sizes from 0.750" to 8". The LVC2000 Coper features an easily adjustable coping angle and a multi-adjustable vise, with a replaceable aluminum jaw that is ideal for easy attachment of jigs of fixtures for any type of part. It is capable of coping square, rectangular, and irregularly shaped tubing to fit perfectly every time.

Click Here to Watch Video

Coper2_large

432 Atwater St
St Paul, MN 55117
Tel: 651.488.0528
Fax: 651.488.1883
Email: sales@lscmetalfab.com
Website: www.lscmetalfab.com

Interstate 287, Morristown, NJ 07960, USA

Customer Service is our number one priority. We understand that machine downtime must be kept to a minimum. Our technical support team will work with you to get your machine up and running quickly. With online manuals, high quality videos, expert advice and experience, we can assist you with restoring your machine to its fullest capabilities in a timely manner, so you can get the machine back into production.

Tired of throwing your machining center away the minute your lease payment is up? Step up to a Kent CNC Vertical Machining Center today! Our full line of precision Vertical Machining Center offers a wide selection of rigid and powerful machines for every application. From Compact models for the most efficient use of floor space, standard #40 and # 50 taper models in linear and box-way designs, to models with traveling column or double column designs, there is a Kent CNC Vertical Machining Center to help you get things done more efficiently, economically, and stay competitive over time. Other specialty models include compact 5-axis machining center with rotary table style or trunnion style designs and high speed drill/tap centers.

3618a-web

Contact Us
1231 Edinger Avenue
Tustin, CA 92780
Phone: 714-258-8526
Fax: 714-258-8530
Email: info@kentusa.com

Bruckner Expressway, Bronx, NY 10455, USA

logo-red

Methods Machine Tools - Boston

65 Union Avenue
Sudbury, MA 01776
Tel: Phone: (978) 443-5388
sales@methodsmachine.com


For over 55 years, Methods Machine Tools, Inc. has been North America's foremost supplier of leading-edge precision machine tools and solutions - providing superior products, engineering and automation, parts and service.

Our many long term partnerships include Nakamura Tome for Turning Centers, Fanuc for Compact CNC Machining and Wire EDM, Kiwa-Japan for Expandable Horizontal Machining Centers, Feeler for Machining Centers, Turning Centers, Bridge Mills and Boring Mills, and we have just introduced our newest partner Yasda for Jig Borers, Jig Mills, Precision Centers, and Micro Centers. We have also partnered with dozens of leading suppliers for automation, tooling and fixtures, ancillary products, and quality control.

5c011e5e-bb3a-4b01-9e49-76cdd0127e32

Click Here to View Video

52 Nykun Ln, Great Meadows, NJ 07838, USA

LOGO-web

Phase-A-Matic, Inc. product lines began in 1965 and continued to grow. Since then we have logged a huge technical database of our applied converter applications on every type of machine and thousands of brands and models. We offer this knowledge and expertise to those who come to us for help for their 3-phase solutions.

Phase converters are used when three-phase lines are not available or are cost prohibitive. Run virtually any three-phase machine at any single-phase location. Our development of phase converter technology produces the required power for CNC and other voltage-sensitive equipment. Installing a phase converter system has great benefits:

· You own your 3-phase power source / portable / great resale value · No 3-phase utility power line installation charges · No 3-phase charge for every start-up load or monthly service fee

We look forward to working with you.

CNC-PAC-30-Side-small

Click Here to Watch Video

PHASE-A-MATIC, INC.
39360 3rd St. East, Suite 301
Palmdale, CA 93550
800-962-6976

138 Mountain Rd, Ledgewood, NJ 07852, USA

logoheader-lg

L&L Special Furnace Co, Inc. designs and builds high temperature furnaces, ovens, quench tanks and heat treating systems. We specialize in batch production furnaces and ovens particularly applications requiring high uniformity and controlled atmosphere. L&L sells and services equipment worldwide.

A storied reputation for sophisticated engineering, quality workmanship, excellent documentation, and professional service has resulted in a large and growing base of satisfied customers, many of them larger and very particular customers. Manufacturing and engineering are integrated in one 15,000 square foot facility just south of Philadelphia, PA.

L_L Large Electric Box Furnace

L&L Special Furnace Co
20 Kent Road
Aston, PA 19014
(877) 846 7628
sales@llfurnace.com

42 Dogwood Circle, Pine Brook, NJ 07058, USA

Screen-Shot-2014-04-29-at-12.57.16-PM-(2)

Unist is a world leader in the design and manufacture of fluid application systems for the industrial market.

We provide innovative solutions to our customers that save money in their manufacturing processes by reducing the amount of fluids consumed. The consistent application of minimum quantities of fluids improves process efficiency and is friendly to the environment by reducing waste.

Using the right lubricant is very important in MQL applications. The perfect lubricant will adhere to the surface of the tool and provide a thin, low friction barrier between the cutting tool and work piece. Studies have shown that Coolube® has superior properties which make it an ideal lubricant. Coolube’s® polar properties create a strong consistent bond between Coolube® and metallic surfaces. This creates an even, strong, and durable layer of lubrication. Coolube® reduces friction 50% better than typical mineral oils preventing heat buildup and resulting in longer tool life and a superior cut finish.

bbased

Contact Us

Unist, Inc.
4134 36th ST SE
Grand Rapids, MI
49512 USA

800.253.5462 - Toll Free (US & CAN)
616.949.0853
Fax: 616.949.9503

91 Patricia Place, Clifton, NJ 07012, USA

amer-banner

For nearly 25 years Amera-Seiki has supplied high-quality Machine Tools to customers across North America. With close to 3000 installations under our belt and a 90% repeat customer rate, Amera-Seiki proves to be the trusted and respected name for machine tools. We also provide the experience and professional services you need when using machine tools in your operation.

One of the broadest lines of horizontal turning solutions available in North America. With swings exceeding 94 inches and center distances to 98 feet. From heavy roughing to high speed finishing, our CNC machines are designed with the strength and rigidity to thrive in your tough manufacturing environment. Many options available.

S-50_LARGE-150x150

Amera-Seiki 1725 Hawkeye Dr Hiawatha, IA 52233 Phone: 319-730-0310

350 Little St, Belleville, NJ 07109, USA

Picture1

Kays Engineering, Inc. is the manufacturer of both the DeHoff and Eldorado brands of deep hole drilling machines. All machines are designed and built in our 50,000 square foot facility in Marshall, Missouri, USA. We take great pride in the excellent reputation our products have earned over the last half-century. Our meticulous attention to detail during the build process ensures that each machine leaving our plant will maintain that reputation and deliver superior performance to our customers for decades to come.

5

Machines_Tooling_webart_125x1251

Please visit our booth South Building-8376

The DeHoff Multi-Axis line of machines offer 3-axis CNC gundrilling capability for drilling complex hole patterns, like those seen in heat exchangers, manifolds and molds. The 0.5-inch and 1-inch (12.7 and 25.4 mm) capacity machines are offered with a “knee” fixture table to provide the X- and Y-axis movement. The 2-inch (50.8 mm) capacity machine has a stationary fixture table with a traveling column to provide the X- and Y-axis movement. Each DeHoff Multi-Axis machine includes our robust coolant system and a Microsoft Windows®-based controls package with CNC G-Code programming capability. Multiple fixturing options are available.

Kays Engineering, Inc.
900 Industrial Drive
Marshall, MO 65340
660-886-9929
http://www.kays-dehoff.com/dehoff

96 Avenue A, Palmerton, PA 18071, USA

logo-1656663407

Headquartered in Peterborough, Ontario, Canada, Quickmill Inc. manufactures a complete line of CNC gantry type machining centres. Since 1984, Quickmill has been a world class supplier of metal cutting solutions in various metal cutting industries worldwide. Our products lines include the Intimidator, Annihilator and Eliminator; heavy duty machine tools for heavy duty applications.

If you need more than just a machine to satisfy your production needs, Quickmill will provide the not only the right machine, but the full turnkey solution to your specific requirement. With our experience in large machine and turnkey systems we have the resources to meet your manufacturing needs.

Turnkey-Solutions Machines_Tooling_webart_125x125

Please visit our booth South Building S-8041

Click Here to View Video



Quickmill Inc.
760 Rye Street
Peterborough, ON Canada K9J 6W9
NA Toll Free: 1-800-295-0509
Phone: +1-705-745-2961
Fax: +1-705-745-8130
E-mail - info@quickmill.com
Website - www.quickmill.com

84 Personette Ave, Verona, NJ 07044, USA

Picture1

Kays Engineering, Inc. is the manufacturer of both the DeHoff and Eldorado brands of deep hole drilling machines. All machines are designed and built in our 50,000 square foot facility in Marshall, Missouri, USA. We take great pride in the excellent reputation our products have earned over the last half-century. Our meticulous attention to detail during the build process ensures that each machine leaving our plant will maintain that reputation and deliver superior performance to our customers for decades to come.

7

Machines_Tooling_webart_125x1251

Please visit our booth South Building-8376

The DeHoff BTA line of drilling machines offer larger drilling capacities for large diameter hole applications, such as those typically seen in the aerospace and petrochemical industries. Four different models are offered with 2 to 6 inches (50.8 to 152.4 mm) of drill capacity available. Because of the large workpieces typically involved, many different fixturing options can be designed and built to suit your application. Each DeHoff BTA machine also includes our robust coolant system and a Microsoft Windows®-based controls package.

Watch Video

Kays Engineering, Inc.
900 Industrial Drive
Marshall, MO 65340
660-886-9929
http://www.kays-dehoff.com/dehoff

136 Emmans Road, Flanders, NJ 07836, USA

logo-red

Methods Machine Tools - Boston


65 Union Avenue
Sudbury, MA 01776
Tel: Phone: (978) 443-5388
sales@methodsmachine.com

For over 55 years, Methods Machine Tools, Inc. has been North America's foremost supplier of leading-edge precision machine tools and solutions - providing superior products, engineering and automation, parts and service.
Our many long term partnerships include Nakamura Tome for Turning Centers, Fanuc for Compact CNC Machining and Wire EDM, Kiwa-Japan for Expandable Horizontal Machining Centers, Feeler for Machining Centers, Turning Centers, Bridge Mills and Boring Mills, and we have just introduced our newest partner Yasda for Jig Borers, Jig Mills, Precision Centers, and Micro Centers. We have also partnered with dozens of leading suppliers for automation, tooling and fixtures, ancillary products, and quality control.

cc57efe2-bcef-4d13-81b8-6e43181fdd16

Click Here to View Video

37 Dorset Dr, Hackettstown, NJ 07840, USA

logoheader-lg

L&L Special Furnace Co, Inc. designs and builds high temperature furnaces, ovens, quench tanks and heat treating systems. We specialize in batch production furnaces and ovens particularly applications requiring high uniformity and controlled atmosphere. L&L sells and services equipment worldwide.

A storied reputation for sophisticated engineering, quality workmanship, excellent documentation, and professional service has resulted in a large and growing base of satisfied customers, many of them larger and very particular customers. Manufacturing and engineering are integrated in one 15,000 square foot facility just south of Philadelphia, PA.

L_L Dual Chamber Electric Box Furnace

L&L Special Furnace Co
20 Kent Road
Aston, PA 19014
(877) 846 7628
sales@llfurnace.com

LaGuardia Airport (LGA), Delta Departures Road, East Elmhurst, NY 11371, USA

banner

Engineering for Tomorrow's Needs.

Specializing in the manufacturing, remanufacturing and retrofitting of machine tools, primarily vertical boring mills and large lathes. By offering remanufactured vertical boring mills, the company saves or conserves millions of dollars per year in energy costs by reutilizing the major castings of each vertical boring mill. These savings, generally in the range of 40% to 60%, allow New Century to be the most price-competitive manufacturer of vertical boring mills in the U.S.

BARNES-2043 (1)

9657 Santa Fe Springs Rd.
Santa Fe Springs, CA 90670
david@newcenturyinc.com
Phone: (562) 906-8455
Fax : (562) 906-8459

1393 Sussex Turnpike, Randolph, NJ 07869, USA

amer-banner

For nearly 25 years Amera-Seiki has supplied high-quality Machine Tools to customers across North America. With close to 3000 installations under our belt and a 90% repeat customer rate, Amera-Seiki proves to be the trusted and respected name for machine tools. We also provide the experience and professional services you need when using machine tools in your operation.

Built to last, offering a powerful combination of speed and rigidity to users in any industry. Our design provides you with a rigid, high performance machine.

AH-400

Amera-Seiki 1725 Hawkeye Dr Hiawatha, IA 52233 Phone: 319-730-0310

21-27 Pheasant Dr, Long Valley, NJ 07853, USA

logoheader-lg

L&L Special Furnace Co, Inc. designs and builds high temperature furnaces, ovens, quench tanks and heat treating systems. We specialize in batch production furnaces and ovens particularly applications requiring high uniformity and controlled atmosphere. L&L sells and services equipment worldwide.

A storied reputation for sophisticated engineering, quality workmanship, excellent documentation, and professional service has resulted in a large and growing base of satisfied customers, many of them larger and very particular customers. Manufacturing and engineering are integrated in one 15,000 square foot facility just south of Philadelphia, PA.

L_LGlass-Quartz Annealing Oven

L&L Special Furnace Co
20 Kent Road
Aston, PA 19014
(877) 846 7628
sales@llfurnace.com

234 Halsey Road, Parsippany, NJ 07054, USA

Screen-Shot-2014-04-29-at-12.57.16-PM-(2)

Unist is a world leader in the design and manufacture of fluid application systems for the industrial market.

We provide innovative solutions to our customers that save money in their manufacturing processes by reducing the amount of fluids consumed. The consistent application of minimum quantities of fluids improves process efficiency and is friendly to the environment by reducing waste.

This Uni-Blend™ System is designed to accurately mix water with concentrated fluids in any ratio from 1:1 to 50:1 and deliver the mixture under pressure to a customer-supplied piping network. The Uni-Blend™ System automatically mixes batches and maintains a reserve supply of up to 50 gallons per ratio. Up to three batches of differing ratios can be maintained in separate tanks. The Uni-Blend™ System is the only fully programmable industrial fluid mixing system available on the market and is built for years of service in tough, industrial environments.

nototefrt

Contact Us

Unist, Inc.
4134 36th ST SE
Grand Rapids, MI
49512 USA

800.253.5462 - Toll Free (US & CAN)
616.949.0853
Fax: 616.949.9503

Showing 1 - 20 of 65 results