632 Elm Avenue, Ridgefield, NJ 07657, USA

ea

Established in 1955, Easter-Owens is internationally recognized in a variety of industries for providing high-quality custom design, manufacturing and product solutions, including but not limited to the following:

  • Power Distribution
  • Metal Fabrication
  • Industrial Controls
  • Detention Systems

Our expert paint division can match practically any color or finish, including R.A.L. paint numbers or our client’s specific color needs.

Powder coat
Composed of entirely non-volatile organic compounds (NVOC), powder coat is safe for transportation and the environment. Simply choose a color and texture and our painters will first apply the powder in our state- of-the-art spray booth; and, subsequently will send it via conveyor to our 24' x 12' x 11' oven where the coating is baked on.

Wet spray
This conventional painting method involves a spray application, followed by baking, cooling and drying cycles.

Graphics
We offer our client’s the choice of reverse engraving, custom legend plates and engraved lamacoid tags, which provide clear, durable labeling for a variety of our solutions.

RAL Color Chart
Whichever painting method is chosen, simply choose a standard RAL color using this guide chart and we will paint it to match your needs.

PAINT-5

Contact Us

Address: 6692 Fig Street
Arvada, CO 80004
Telephone: 303.431.0111
Fax: 303.424.2040
E-Mail: sales@easter-owens.com

36 Mountainside Drive, Randolph, NJ 07869, USA

Our engineering starts with a customer's engineered drawing that we break down into operational sheets. This facilitates the correct routing of parts and assures the accuracy needed to begin processing the order.

Precision CNC vertical and lathe machining, milling, turning, drilling, boring, and grinding for Utility Companies, Steel Mills, Cement Plants, Mining Industries, Motor Repair Shops, Marine Shipyards, and many other industries.

Specialize in Milling, Turning, Drilling, Boring, Grinding, Sawing, Spin Casting, Static Casting, Welding, Heat Treating, and Babbitting.

Contact Us

A-1 Babbitt Company
PO Box 791
1122 Babbitt Road
Donora, PA 15033
Phone: 724-379-6588
Fax: 724-379-8485
Email:  a1babbitt@aol.com
Website:www.a1-babbitt.com

988-1060 West Shore Road, Mill Neck, NY 11765, USA

banner

At Horizon Industries, our customers have always recognized us for our diversity in manufacturing techniques. We have been providing top quality parts and assemblies to our varied customer base for the past 48 years. Our expertise lies in the areas of general and CNC machining, metal stamping, CNC sheet metal fabrication and a variety of finishing and welding options to meet our customer's custom parts requirements.

When the parts that we produce require a plated or anodized finish, we use one of several local companies, where we have long-standing business relationships established. We can trust these companies to produce quality finished parts to meet the requirements of our customers. There are a wide variety of different plated finishes used for steel parts and passavation for stainless steel parts. For aluminum there are a number of finishes offered including anodizing with many different colors available.

331a

Contact Us

410 S. 12th St.,
Columbia, PA 17512.
Phone: 800- 270-5096
Fax: 717-684-2944
Email: sales@horizoninds.com

2 Greenwood Road, Morris Plains, NJ 07950, USA

Screen-Shot-2014-04-29-at-12.57.16-PM-(2)

Unist is a world leader in the design and manufacture of fluid application systems for the industrial market.

We provide innovative solutions to our customers that save money in their manufacturing processes by reducing the amount of fluids consumed. The consistent application of minimum quantities of fluids improves process efficiency and is friendly to the environment by reducing waste.

Slippery floors, a messy press, and stamped parts swimming in oil are just some of the headaches that the patented Uni-Roller systems from Unist can eliminate. With solutions for material from 1” to over 72” wide, we have the answers for metal formers struggling to apply fluid consistently and cost effectively. Our customers represent a diverse group of manufacturers, each running unique metal forming operations, yet all appreciating that their Unist systems not only save them money, but also improve production efficiency!

metalforming

Contact Us

Unist, Inc.
4134 36th ST SE
Grand Rapids, MI
49512 USA

800.253.5462 - Toll Free (US & CAN)
616.949.0853
Fax: 616.949.9503

1-3 Chapin Road, Bernardsville, NJ 07924, USA

banner

At Horizon Industries, our customers have always recognized us for our diversity in manufacturing techniques. We have been providing top quality parts and assemblies to our varied customer base for the past 48 years. Our expertise lies in the areas of general and CNC machining, metal stamping, CNC sheet metal fabrication and a variety of finishing and welding options to meet our customer's custom parts requirements.

We have three hydraulic press brakes, two with CNC gauging, and three sheet metal rolls, two of which have a numerical readout. All of these machines enable us to bend and form your parts with accuracy and repeatability.

a

Contact Us

410 S. 12th St.,
Columbia, PA 17512.
Phone: 800- 270-5096
Fax: 717-684-2944
Email: sales@horizoninds.com

154-57 Riverside Drive, Flushing, NY 11357, USA

ea

Established in 1955, Easter-Owens is internationally recognized in a variety of industries for providing high-quality custom design, manufacturing and product solutions, including but not limited to the following:

  • Power Distribution
  • Metal Fabrication
  • Industrial Controls
  • Detention Systems

Each system is tested for full functionality prior to shipment; and, Easter-Owens personnel are always available to ensure that our client’s systems are installed and operating properly.

Testing

Contact Us

Address: 6692 Fig Street
Arvada, CO 80004
Telephone: 303.431.0111
Fax: 303.424.2040
E-Mail: sales@easter-owens.com

20 Hilltop Circle, Morristown, NJ 07960, USA

banner

At Horizon Industries, our customers have always recognized us for our diversity in manufacturing techniques. We have been providing top quality parts and assemblies to our varied customer base for the past 48 years. Our expertise lies in the areas of general and CNC machining, metal stamping, CNC sheet metal fabrication and a variety of finishing and welding options to meet our customer's custom parts requirements.

The various types of manufacturing processes in fabrication and machining many times produces sharp edges and burrs on the edges of parts. Vibratory tumbling is a process that can be used to efficiently remove the burrs and smooth the surface finish of the manufactured parts. The tumbling media is selected based on the type of material, size and shape of the parts to be processed. We have various sizes of machines, as well, that are chosen based on the size and quantity of parts.

11

Contact Us

410 S. 12th St.,
Columbia, PA 17512.
Phone: 800- 270-5096
Fax: 717-684-2944
Email: sales@horizoninds.com

124 Albertson Parkway, Albertson, NY 11507, USA

1

Incorporated in 1998, Multi Machining Capabilities has focused on providing the highest quality CNC Machined products possible. With a diverse Equipment collection and over 100 years of combined management experience, MMC understands what is expected of them as a world class supplier.

MMC also utilizes its sister company, world class screw machine supplier Elkins Machine & Tool

Everything you Need Under One Roof

Multi Machining Capabilities (MMC) is a lean manufacturer of precision machine components. We offer a full range of services to produce the parts you need when you need them. From pilot parts to prototypes to mass production, our highly skilled machinists have the expertise and capability to create unique solutions in a variety of tolerances for our customers.

In addition to our extensive experience in operating precision CNC milling and turning, our turnkey services include:

  • Packaging
  • Quality Control
  • Product Testing
  • Proactive Customer Service+

12

Contact Us

E-Mail: r.stingu@mmc-cnc.com

Ocean Parkway, Massapequa, NY 11758, USA

ba

Bring your technology challenges to the experts where service to customers comes first, and problem solving is a 24-hour-a-day business.

Machinists Inc. has been solving complex machining problems for more than 50 years. It is the largest precision machining shop in the Northwest specializing in single components to complete manufacturing systems 24/7.

  • Experts in welding, machining and engineering
  • Precision machining for large and complex parts
  • Manufacturing complete assemblies
  • Large sized shaft turning for urgent repairs or planned maintenance.

Specialized, full service solutions.

We provide the right finish for your project’s specific environment. Our range of abrasive media include shot peening, soda blasting and wheelabrating. Coating applications extend to epoxies, plural components, and metallizing with ferrous, non-ferrous and metal alloys.

bl

Contact Us

7600 5th Ave. South
P. O. Box 80505
Seattle, WA. 98108
Phone: 206 / 763 0990
Fax: 206 / 763 8709
Email:  info@machinistsinc.com
Website:www.machinistsinc.com

39 Bates Street, Dayton, Ohio 45402, United States

Diversified Screw Machined and CNC Machined Metal Parts Manufacturer

Several years ago in response to customer demand Ohio Metal Products decided to make CNC machining a major part of our business. Since then we have installed several CNC turning and machining centers. The addition of our CNC machining department has allowed Ohio Metal Products to provide our customers with a class of ultra high precision product that conventional screw machines are not capable of producing.

At Ohio Metal Products we realize that our customers want to purchase completed parts. Sometimes that involves processes that are outside our area of expertise. That is why we have partnered with some of the most reputable heat treaters and platers in the area.

heat-treating-plating

Contact Us

39 Bates Street
Dayton, OH 45402
Toll Free: 800.398.2588
Tel: 937.228.6101
Email: info@ohio-metal.com
Website: www.ohio-metal.com

1500-1598 Valley Brook Avenue, Lyndhurst, NJ 07071, USA

banner

At Horizon Industries, our customers have always recognized us for our diversity in manufacturing techniques. We have been providing top quality parts and assemblies to our varied customer base for the past 48 years. Our expertise lies in the areas of general and CNC machining, metal stamping, CNC sheet metal fabrication and a variety of finishing and welding options to meet our customer's custom parts requirements.

Although we started with a heavier emphasis on the fabrication service that we provide, we found that there were many instances where fabricated parts required machining operations to be completed. In addition, our customers asked us to quote on their machined parts requirements along with the fabrications that we supplied to them.

OLYMPUS DIGITAL CAMERA Contact Us

410 S. 12th St.,
Columbia, PA 17512.
Phone: 800- 270-5096
Fax: 717-684-2944
Email: sales@horizoninds.com

170-392 Troy Meadow Road, Parsippany, NJ 07054, USA

tri-banner

For over thirty years Tri-Gon has been providing quality precision parts to some of the most well respected companies in the world.

Our success over this period of time has not been an accident, but the determined result of offering competitive pricing, quality standards, state of the art technology and a simple ongoing commitment to customer satisfaction.

Tri-Gon Precision has developed an expertise in the manufacturing of ultra high precision components utilizing our Swiss CNC Screw Machines, Grinding Capabilities, Laser Machining, Honing, Polishing, and complete secondary capabilities. Tri-Gon's tolerancing can go as tight as .000020" with surface finishes down to 1 micro inches.

Tri-Gon Precision has for a long time worked with our customer's R & D engineers to assist with the engineering of their products. Therefore, Tri-Gon welcomes prototype quantities to production quantities.

77

Contact Us

820 S. Sahwatch Street
Colorado Springs, CO 80903
Toll Free: 800/959-0988
Phone: 719/473-2635
Fax: 719/473-3309
sales@tri-gon.com

10 Elder Drive, Morristown, NJ 07960, USA

banner

At Horizon Industries, our customers have always recognized us for our diversity in manufacturing techniques. We have been providing top quality parts and assemblies to our varied customer base for the past 48 years. Our expertise lies in the areas of general and CNC machining, metal stamping, CNC sheet metal fabrication and a variety of finishing and welding options to meet our customer's custom parts requirements.

We have a High Definition AKS CNC Plasma Cutting Machine that will process up to 6-foot x 12-foot long sheets of aluminum, carbon steel or stainless steel. We can offer quick turnaround of custom cut shapes for our customers. In addition, for applicable jobs, we partner with local laser vendors to provide accurate parts and quick service to our customers.

b

Contact Us

410 S. 12th St.,
Columbia, PA 17512.
Phone: 800- 270-5096
Fax: 717-684-2944
Email: sales@horizoninds.com

7601 Acacia Ave, Garden Grove, CA 92841, United States
(714) 897-6110 / (714) 897-8827 (Fax)

Helfrich Tool & Die Corp. began it's Metal Stamping - Tool and Die Company from our humble beginnings in the '1930's by the Grandfather of the company's President, John C. Helfrich. The small job shop in Gardenia, California (Los Angeles area) committed to providing a quality tool die making and custom metal stamping company that evolved into a high quality industrial job shop with competitive pricing.

Through the years and three generations of the Helfrich family company, close loyalties developed with customers who could count on their die metal stamping or die making tool job being done right and shipped on time.

Contact Us

7601 Acacia Ave.
Garden Grove, CA 92841
Phone : (714) 897-6110
Fax : (714)-897-8827
Mailjohn@helfrichtool.com
Websitewww.helfrichtool.com

501 James Street, Morristown, NJ 07960, USA

banner

At Horizon Industries, our customers have always recognized us for our diversity in manufacturing techniques. We have been providing top quality parts and assemblies to our varied customer base for the past 48 years. Our expertise lies in the areas of general and CNC machining, metal stamping, CNC sheet metal fabrication and a variety of finishing and welding options to meet our customer's custom parts requirements.

There are many jobs that require making the component parts and then putting them together using MIG, TIG or spot welding. We also have jobs that require assembly using standard hardware such as bolts, nuts, washers and screws. In addition, we assemble parts that require us to apply gasket material, press in captive studs or nuts and install rivet-nuts. Please keep us in mind to not only manufacture your custom parts, but to also assemble them to your specifications.

123

Contact Us

410 S. 12th St.,
Columbia, PA 17512.
Phone: 800- 270-5096
Fax: 717-684-2944
Email: sales@horizoninds.com

22 Mark Twain Drive, Morristown, NJ 07960, USA

Blue Grass Manufacturing Banner

Veteran Owned and Managed Made in the USA!

Conveniently located in Lexington, Kentucky Blue Grass Manufacturing can assist you in all phases of the manufacturing process -- cost reduction, manufacturing engineering, tool building, fabricating, welding, machining, assembly, sourcing and purchasing even order entry and customer fulfillment.

We are specialists in the manufacturing processes we host.

We have been in business for over 40 years. We operate a 100,000 square foot, clean contract manufacturing facility in Lexington, Kentucky. We are able to configure a wide variety of production cells and assembly lines in the plant to manufacture everything from labor intensive assembly lines, large welded assemblies, to work cells for machining, or high-precision micro-welded halogen bulbs for aircraft landing lights.

dishwashercomp1

Contact Us

Blue Grass Mfg Co.
1454 Jingle Bell Lane,
Lexington KY 40509
Phone: (859) 233-7445
Fax: (859) 233-0081
Email: Sales@bluegrassmfg.com
Website:www.bluegrassmfg.com

DMS
21 Cheryl Road, Pine Brook, NJ 07058, USA

dms-banner

DMS offers expert precision sheet metal fabrication and welding services on scales almost without limits. DMS provides drawing assistance to ensure accuracy with your blueprint designs. We pay close attention to your projects in detail without loosing sight of the larger picture. Let us show you why we received 5 star ratings from large orginizations such as "NASA-JGRC", to companies and private individuals who like many others simply needed thier jobs done correctly. We service all who require Precision metal fabrication.

1

Contact Us

Address: 44405 N 14th Street
New River, AZ 85087-7381
Phone: (623) 465-7076
Fax: (623) 465-2580
Toll Free: (877) 881-3330
E-Mail: DMSkamas_9@msn.com

Machinists Inc. 7600 5th Ave. South P. O. Box 80505, Seattle 98108

ba

Bring your technology challenges to the experts where service to customers comes first, and problem solving is a 24-hour-a-day business.

Machinists Inc. has been solving complex machining problems for more than 50 years. It is the largest precision machining shop in the Northwest specializing in single components to complete manufacturing systems 24/7.

  • Experts in welding, machining and engineering
  • Precision machining for large and complex parts
  • Manufacturing complete assemblies
  • Large sized shaft turning for urgent repairs or planned maintenance.

When size matters, we can help.

Our four plants, with 3.5 acres of lay-down space, provide the equipment and logistics to handle your large scale or multi-part projects. This includes:

  • 65,000-pound capacity forklift
  • Finishing rooms with 20 foot ceilings
  • Up to 100,000 square feet of working areas Storage facility to inventory your products until needed.

 

red

Contact Us

7600 5th Ave. South
P. O. Box 80505
Seattle, WA. 98108
Phone: 206 / 763 0990
Fax: 206 / 763 8709
Email:  info@machinistsinc.com
Website:www.machinistsinc.com

110-15 178th Street, Jamaica, NY 11433, USA

header01_cus_005

Peirce Welding and Fabricating, Inc. was started in May 1981 by David Peirce, a man with over 20 years experience in the Steel Industry. The goal of the company was delivering quality workmanship and services at competitive prices. July 1994 marked the start of another generation committed not only to workmanship, service and price, but also to investing in your needs through the expansion of our facilities and the upgrading of its equipment.

Peirce Welding & Fabricating, Inc., located in Bethel, PA., specializes in metal fabricating, including: hot and cold rolled carbon steels, abrasive resistant steels, stainless steel, galvanized steel and aluminized steels. We fabricate runways, overhead bridge cranes, solar racking and mounting systems, material handiling equipment, enclosures and many other metal fabrication products.

steel
We service the Pennsylvania, New Jersey, Delaware, Maryland, Eastern Ohio and Southern New York Region.
Contact Us

Peirce Welding and Fabricating Inc.
170 Airport Rd.
Bethel, PA 19507
Phone: 717.933.8087
Fax: 717.933.9267
E-mail: info@peircewelding.com
Web Address: www.peircewelding.com

Van Wyck Expressway, Queens, NY, USA

Diversified Screw Machined and CNC Machined Metal Parts Manufacturer

Ohio Metal Products can manufacture precision metal parts by utilizing high speed broaching for a variety of metals including brass, stainless steel and a wide range of steel alloys. Ohio Metal Products can provide complete engineering assistance to help determine the appropriate material and manufacturing process for your specific product needs.

broach-metal-parts

Contact Us

39 Bates Street
Dayton, OH 45402
Toll Free: 800.398.2588
Tel: 937.228.6101
Email: info@ohio-metal.com
Website: www.ohio-metal.com

Showing 1 - 20 of 102 results