3074 New Jersey 10, Denville, NJ 07834, USA

logo

The J.F. Berns Company manufactures high quality CNC Lathe and Bar Feeding accessories to increase your machining productivity. Products include spindle liners, bar chamfering machines, bar supports, spindle stops, draw tubes, draw bars, spindle extensions and special loaders and unloaders.

The J.F. Berns Company has been providing quality spindle parts for over 20 years.

Draw Tubes & Draw Bars

img_drawtubes_drawbars_2

Draw Tubes are used to connect the hydraulic actuator with the chuck on a Lathe

Spindle Stops / Part Stops

spindletop

Designed to provide a repeatable stop for front loading of parts through a CNC.

CNC Lathe Part Ejectors

ejector

Designed to mount in a CNC Lathe main spindle or sub spindle and provide.

Spindle Liners for CNC Lathes

spindle3

Best quality & service, fastest delivery, free extensions, easy-out design.

JF Berns Company, Inc.
11115 Ashburn Rd.
Cincinnati, OH 45240
513-851-4600
info@jfberns.com

88 Clinton Road, Fairfield, NJ 07004, USA

briney-banner

Briney Tooling Systems is the leading supplier of CNC tool holders and shrink fit tooling systems in North America. Every tool holder we make is precision engineered with today’s high-speed spindles in mind. Our Tru VelocityTM tools can run up to 20,000 RPM without putting undue stress on a machine spindle and our Maximum VelocityTM tooling is balanced to 2.5 G or better at 30,000 RPM. This specification will meet or exceed the spindle balance specification for all machine tool builders.

This precision means you will get 100% longer tool life out of our shrink fit tool holders. It also means less down time for change outs, less spindle wear, optimum speeds and feed rates, and lower overall life cycle operating cost.

A collet chuck is a superior choice to a three-jaw chuck in terms of consistency, repeatability, higher speeds, and longer tool life. Briney BR/ER collet chucks are balanced to 2.5 G at 20,000 RPM, concentric .0002” shank-to-bore.

BR_Collet_Chuck



Contact Us

700 E Soper Road
Bad Axe, MI 48413
Phone: (800) 752-8035
Fax: (989) 269-9559
briney@geminigroup.net

3-5 Blue Grass Ln, Hackettstown, NJ 07840, USA

hemiteclogotop_0

Precision as Principle

Heimatec is a world leader in the development and manufacturing of live tools, angle heads and multi-spindle drill heads. With U.S. head quarters located in the Chicagoland area and company head quarters and manufacturing in Renchen Germany, we are dedicated to supplying our customers the most innovative tooling technology possible.

Through use of our special clamping screw, our easy-quick HT system offers comfortable handling. All adapters can be changed within seconds with the highest available precision.

Print

Click Here to Watch Video

Heimatec Inc.
16 E. Piper Lane Suite 129
Prospect Heights, IL 60070
(847) 749-0633
info@heimatecinc.com

30 Flanders Road, Budd Lake, NJ 07828, USA

carmex_banner

Carmex Precision Tools Ltd. is a leading manufacturer of high quality cutting tools. Carmex specialize in the production of threading tools for turning and milling. Our product lines include Thread Turning inserts and toolholders, Mill Thread inserts and tool holders, Mill-Thread Solid Carbide and Spiral Mill Thread.

Contact Us


Address: 2075 Highway 175

Richfield, WI 53076
Phone: 262-628-5030
E-Mail: Sales@CarmexUSA.com

47 Alphano Rd, Great Meadows, NJ 07838, USA

ClampriteLogo

The most economical tool for spindle drawbar testing!

No batteries or clumsy extension cords, no delicate electronics to adjust or burn out, and Clamprite Gages are designed for years of daily use in the shop environment.

Get a Clamprite Gage and find out if your spindles can still Clamprite!

All Gage Kits include a Certificate of Accuracy traceable to NIST

Clamprite offers free periodic inspection for accuracy for as long as you own your gage!

Made in USA

HSK 63 Adapter

Clamprite, LLC
38 Cygnet Drive
Carson City, NV 89706

Email: jerome@clamprite.com
Phone: (775) 246-5100

52 Lawrence Rd, Randolph, NJ 07869, USA

Header

Get Current Price and Availability for CHUCK JAWS using USST part numbers

THE LARGEST VARIETY OF CHUCK JAWS IN THE USA! - Use your VISA or MASTERCARD to Order Online at www.USSTEXPRESS.COM

101110

Click Here to Watch Video

1-800-243-7701
sales@usshoptools.com

22 Exeter Street, Morris Plains, NJ 07950, USA

carmex_banner

Carmex Precision Tools Ltd. is a leading manufacturer of high quality cutting tools. Carmex specialize in the production of threading tools for turning and milling. Our product lines include Thread Turning inserts and toolholders, Mill Thread inserts and tool holders, Mill-Thread Solid Carbide and Spiral Mill Thread.

Solid Carbide tools for working in small bores (from diameter 2.1 mm). These tools are made for the high tech, medical & small components industry. They are used in machining centers or conventional machines. The Tiny Tools are available in the excellent BXC TiN coated grade, for machining a wide range of stainless steels in low cutting speed.

These tools can perform the following applications -

  • Boring
  • Back Turning
  • Profiling and Boring
  • Threading
  • Chamfering and Boring
  • Grooving
  • Face Grooving

1078     

Click Here to Watch Video

Contact Us

Address: 2075 Highway 175

Richfield, WI 53076

Phone: 262-628-5030

E-Mail: Sales@CarmexUSA.com

17 Evergreen Rd, Denville, NJ 07834, USA

logo

One Operation - For Front and Back Deburring, Chamfering, Drilling and Countersinking

As the industry leader, HEULE manufactures the highest quality, most reliable cutting tools designed to give you a superior finished part off the machine. You can find HEULE tools in some of the world's largest manufacturers and the smallest machine shops.

HEULE offers local inventory and engineering support for quick delivery and outstanding customer service to the United States, Canada, and Mexico.

image001

Heule Tool Corporation
131 Commerce Drive
Loveland, Ohio 45140
Email: info@heuletool.com
http://www.heuletool.com

16 Nutwold Avenue, West Orange, NJ 07052, USA

carmex_banner

Carmex Precision Tools Ltd. is a leading manufacturer of high quality cutting tools. Carmex specialize in the production of threading tools for turning and milling. Our product lines include Thread Turning inserts and toolholders, Mill Thread inserts and tool holders, Mill-Thread Solid Carbide and Spiral Mill Thread.

Carmex Thread-Turning product line is recognized worldwide for its full range of high quality laydown triangular inserts answering to most of the thread standards. Two types of inserts are offered. The main are grounded profile and chip breaker inserts, delivering high quality threads, offered in a big variety of grades and coatings to fit all manufacturing purposes.

Within this range we offer also Ultra - Miniature and Miniature inserts for threading bores as small as 6mm diameter, Vertical (on edge) inserts, Multitooth inserts and U Type inserts.

576  

Click Here to Watch Video

Contact Us

Address: 2075 Highway 175

Richfield, WI 53076

Phone: 262-628-5030

E-Mail: Sales@CarmexUSA.com

KHK
11 Rose Ln, Hackettstown, NJ 07840, USA

KHK-logo

Presidents Message


Founded in 1935, Kohara Gear Industry Co., Ltd. is a leading manufacturer of gearing in Japan. Having been a company solely devoted to the manufacture of gears for 80 years, Kohara Gear Industry is world renowned for their KHK brand of gears. In 2005, KHK completely rebuilt their headquarters and factory location in Kawaguchi Japan to the latest earthquake standards. In 2015, KHK introduced their latest catalog KHK 3013. This catalog contains approximately 175 styles of gears in more than 15,000 configurations.

youtube_promotion

Contact Us

KHK-USA
259 Elm Pl
Mineola, NY 11501
info@khkgears.us
(516) 248-3850

Industrial Loop, Great Meadows, NJ 07838, USA

hemiteclogotop_0

Precision as Principle

Heimatec is a world leader in the development and manufacturing of live tools, angle heads and multi-spindle drill heads. With U.S. head quarters located in the Chicagoland area and company head quarters and manufacturing in Renchen Germany, we are dedicated to supplying our customers the most innovative tooling technology possible.

mmsonline101512-t

Click Here to Watch Video

Heimatec Inc.
16 E. Piper Lane Suite 129
Prospect Heights, IL 60070
(847) 749-0633
info@heimatecinc.com

100-114 Howard Blvd, Ledgewood, NJ 07852, USA

logo

One Operation - For Front and Back Deburring, Chamfering, Drilling and Countersinking

As the industry leader, HEULE manufactures the highest quality, most reliable cutting tools designed to give you a superior finished part off the machine. You can find HEULE tools in some of the world's largest manufacturers and the smallest machine shops.

HEULE offers local inventory and engineering support for quick delivery and outstanding customer service to the United States, Canada, and Mexico.

image001

Heule Tool Corporation
131 Commerce Drive
Loveland, Ohio 45140
Email: info@heuletool.com
http://www.heuletool.com

99 Upper Pond Rd, Parsippany, NJ 07054, USA

Header

Get Current Price and Availability for CHUCK JAWS using USST part numbers

THE LARGEST VARIETY OF CHUCK JAWS IN THE USA! - Use your VISA or MASTERCARD to Order Online at www.USSTEXPRESS.COM

101060

Click Here to Watch Video

1-800-243-7701
sales@usshoptools.com

1297 Sunrise Blvd, Mt Bethel, PA 18343, USA

logo2

About The EZ-Puller

The Ez-Puller came about because of the frustration and time wasted setting up and fine-tuning traditional bar pullers that were available to me a few years ago. We are a job-shop machine shop and our lathe work is often short run 5-10-50 or 100 pieces. In most cases, the short run nature of the job does not warrant setting up one of these traditional bar pullers – it takes too much time. However, doing things this way meant we had to put an operator in front of the machine to manually pull the bar after each part was completed. To me this was lost production, I needed a bar puller that could be set up for any bar diameter – within the range of the tool – in seconds. The tool needed to be reliable, repeatable and rugged enough to stand up to the probability 100’s of thousands if not millions of pulls.

A few prototypes and a few modifications later, I had this neat little tool that does exactly what I wanted it to and even more. The Ez-Puller can pull not only round but octagon, hex and square stock – without spindle orientation (M19). We have also found that when we install a softer spring (60A or 80A durometer) we can pull PTFE and other delicate materials without damaging the stock.

Please take a few minutes to watch the video. Then take a moment to read our warranty. We stand behind what We build.

Thank you, Dan Kenner

EZ-PULLER The Big EZ BAR PULLER
$795.00 + shipping $15.00
VERY USER FRIENDLY
NO MECHANICAL ADJUSTMENT NECESSARY (X axis end point gets changed in the program when changing bar diameters)
ONE TIME SETUP
BGEZ2

Click Here to Watch Video

Accudyne Products
2835 S. Raritan St
Englewood, CO 80110 US
Phone: 303.991.1500
Fx: 303.991.1921
dan@ezpullerusa.com

71 Mountain Rd, Oxford, NJ 07863, USA

logo2

About The EZ-Puller

The Ez-Puller came about because of the frustration and time wasted setting up and fine-tuning traditional bar pullers that were available to me a few years ago. We are a job-shop machine shop and our lathe work is often short run 5-10-50 or 100 pieces. In most cases, the short run nature of the job does not warrant setting up one of these traditional bar pullers – it takes too much time. However, doing things this way meant we had to put an operator in front of the machine to manually pull the bar after each part was completed. To me this was lost production, I needed a bar puller that could be set up for any bar diameter – within the range of the tool – in seconds. The tool needed to be reliable, repeatable and rugged enough to stand up to the probability 100’s of thousands if not millions of pulls.

A few prototypes and a few modifications later, I had this neat little tool that does exactly what I wanted it to and even more. The Ez-Puller can pull not only round but octagon, hex and square stock – without spindle orientation (M19). We have also found that when we install a softer spring (60A or 80A durometer) we can pull PTFE and other delicate materials without damaging the stock.

Please take a few minutes to watch the video. Then take a moment to read our warranty. We stand behind what We build.

Thank you, Dan Kenner

INTRODUCTORY PRICE $595 (Normal Price $725)
EZ-PULLER EP12044VERY USER FRIENDLY
NO MECHANICAL ADJUSTMENT NECESSARY
(X axis end point gets changed in the program when changing bar diameters)
ONE TIME SETUP
NEVER NEEDS ADJUSTMENT

EZ-PULLER1-571x1024 (1)

Click Here to Watch Video

Accudyne Products
2835 S. Raritan St
Englewood, CO 80110 US
Phone: 303.991.1500
Fx: 303.991.1921
dan@ezpullerusa.com

71 Ridge Drive, Livingston, NJ 07039, USA

briney-banner

Briney Tooling Systems is the leading supplier of CNC tool holders and shrink fit tooling systems in North America. Every tool holder we make is precision engineered with today’s high-speed spindles in mind. Our Tru VelocityTM tools can run up to 20,000 RPM without putting undue stress on a machine spindle and our Maximum VelocityTM tooling is balanced to 2.5 G or better at 30,000 RPM. This specification will meet or exceed the spindle balance specification for all machine tool builders.

This precision means you will get 100% longer tool life out of our shrink fit tool holders. It also means less down time for change outs, less spindle wear, optimum speeds and feed rates, and lower overall life cycle operating cost.

Every CAT tool holder Briney makes is manufactured in the USA from Certified material and production quality is ensured through ISO 9001:2008 policies. Our Tru Velocity™ tools can run up to 20,000 RPM without putting undue stress on machine spindles and our Maximum Velocity™ tooling is balanced to 2.5 G or better at 30,000 RPM. Exceptional balance and 50% deeper case depths than our competition mean you get 100% more life out of your tool holders.

CAT



Contact Us

700 E Soper Road
Bad Axe, MI 48413
Phone: (800) 752-8035
Fax: (989) 269-9559
briney@geminigroup.net

302 Jost Dr, Oxford, NJ 07863, USA

logo

Michigan Deburring Tool was founded by Jim Robinson in 2002 who set out to produce custom deburring tools built to application specifications. An accomplished tool maker and designer , Robinson established Michigan Deburring Tool to provide more cost - effective and easy -to-use alternatives than the deburring tools that were then available in the marketplace.

With the introduction of the Modular Hole Deburring System in 2006, Michigan Deburring Tool expended its production capabilities to include standard, off -the -shelf tools capable of handling a larger range of applications to more fully serve their customers.

Click Here to Watch Video

Michigan Deburing Tool
2155 Pless Dr, Suite B
Brighton, MI 48114
Phone ( 810) 227-1000
Fax ( 810) 227-1002
Email: mideburr@aol.com

98 Free Union Rd, Belvidere, NJ 07823, USA

logo

Michigan Deburring Tool was founded by Jim Robinson in 2002 who set out to produce custom deburring tools built to application specifications. An accomplished tool maker and designer , Robinson established Michigan Deburring Tool to provide more cost - effective and easy -to-use alternatives than the deburring tools that were then available in the marketplace.

With the introduction of the Modular Hole Deburring System in 2006, Michigan Deburring Tool expended its production capabilities to include standard, off -the -shelf tools capable of handling a larger range of applications to more fully serve their customers.

Click Here to Watch Video

Michigan Deburing Tool
2155 Pless Dr, Suite B
Brighton, MI 48114
Phone (810) 227-1000
Fax (810) 227-1002
Email: mideburr@aol.com

29-49 Hurd St, Mine Hill Township, NJ 07803, USA

servo-banner

QUALITY REPAIRS GUARANTEED TO RUN ON YOUR MACHINE

WE SPECIALIZE IN REPAIRING PACIFIC SCIENTIFIC 33VM52-000-29 SERVO MOTORS

SERVICE
Get back up and running in no time. 24 hour turnaround in most cases

VALUE
With competitive rates and fast service, we’ll give you the best value for your time and money.

INTEGRITY
We believe in treating our customers fairly because we want your business now, and far into the future.

256-318-3694
721 Co. Rd. 1117
Cullman AL 35057 US

JM
100 Bald Eagle Rd, Hackettstown, NJ 07840, USA

J.M.-Sales-USA-logo

We are the US and Canadian representative for Hahnreiter Prazision high-quality taps. Hahnreiter has been in business since 1867 and is family owned and operated. Quality without compromise gave the name “HAHNREITER PRÄZISION” it’s excellent reputation.

Hahnreiter Gewindetechnik produces High Performance Taps in tool diameters from 1mm up to 250mm. The standard catalog includes over 8,600 items, most of which is in stock. Special Taps are also a mainstay at Hahnreiter. Application, design and testing are carried on at their new modern facilities in Remscheid, Germany.

Hahnreiter Taps

Click Here to View Catalog

J.M. Sales – USA
2265 Livernois, Suite 750
Troy, MI 48083
(248) 879-5984
http://www.jmsales-usa.com
contact@jmsales-usa.com

Showing 1 - 20 of 87 results