111 Hook Mountain Road, Montville, NJ 07045, USA

briney-banner

Briney Tooling Systems is the leading supplier of CNC tool holders and shrink fit tooling systems in North America. Every tool holder we make is precision engineered with today’s high-speed spindles in mind. Our Tru VelocityTM tools can run up to 20,000 RPM without putting undue stress on a machine spindle and our Maximum VelocityTM tooling is balanced to 2.5 G or better at 30,000 RPM. This specification will meet or exceed the spindle balance specification for all machine tool builders.

The holding mechanism used in tapping systems differs from that of any other tool style in that a tap will have a square machined on the rear of the shank. The square on the tap shank will mount in to the tap collet or chuck depending on the type of holder used.

Tapping_Systems



Contact Us

700 E Soper Road
Bad Axe, MI 48413
Phone: (800) 752-8035
Fax: (989) 269-9559
briney@geminigroup.net

68 Wexford Drive, Mendham, NJ 07945, USA

logo

The J.F. Berns Company manufactures high quality CNC Lathe and Bar Feeding accessories to increase your machining productivity. Products include spindle liners, bar chamfering machines, bar supports, spindle stops, draw tubes, draw bars, spindle extensions and special loaders and unloaders.

Spindle Liners (also referred to as filler tubes, reduction tubes, master liners or sleeves), are used to reduce the I.D. of a CNC Lathe spindle. Clearance is application and material dependent, but usually they are sized to 0.030"-0.060" over the diameter of the bar being machined.

spindle1

JF Berns Company, Inc.
11115 Ashburn Rd.
Cincinnati, OH 45240
513-851-4600
info@jfberns.com

99-103 Claremont Avenue, Montclair, NJ 07042, USA

briney-banner

Briney Tooling Systems is the leading supplier of CNC tool holders and shrink fit tooling systems in North America. Every tool holder we make is precision engineered with today’s high-speed spindles in mind. Our Tru VelocityTM tools can run up to 20,000 RPM without putting undue stress on a machine spindle and our Maximum VelocityTM tooling is balanced to 2.5 G or better at 30,000 RPM. This specification will meet or exceed the spindle balance specification for all machine tool builders.

This precision means you will get 100% longer tool life out of our shrink fit tool holders. It also means less down time for change outs, less spindle wear, optimum speeds and feed rates, and lower overall life cycle operating cost.

Every BT tool holder Briney makes is manufactured in the USA from Certified material and production quality is ensured through ISO 9001:2008 policies. BT tool holders are symmetrical around the spindle access giving them greater stability at high speeds. Briney’s Maximum VelocityTM tooling is balanced to 2.5 G or better at 30,000 RPM. Exceptional balance and the deepest case depths in the industry mean you get 100% more life out of our tool holders.

BT



Contact Us

700 E Soper Road
Bad Axe, MI 48413
Phone: (800) 752-8035
Fax: (989) 269-9559
briney@geminigroup.net

Skyline Drive, Randolph, NJ 07869, USA

header_01

Quality Chuck Jaws made in the USA. ISO 9001:2000 Certified Manufacture & distributor of chucks, Chuck Jaws, products available include; Power Chucks featuring soft and hard jaws.

1.5MM x 60 Serrated

3.0MM x 60 Serrated

1/16 x 90 Serrated

3/32 x 90 Serrated

Amer . Standard Tongue & Groove

Matric Tongue & Groove

Acme Serrated Key Type

Square Serrated Key Type

Pin Location Type

Misc. Jaws

Collet Pads & Jaws

Special Soft Jaws

Special Hard Jaws

Accessories

Contact Us

2115 Progress Drive

Springfield, Ohio 45505

Email: sales4@dillonmfg.com

Phone: 1-800-428-1133

Fax: 1-800-634-6480

19 Trombley Drive, Livingston, NJ 07039, USA

briney-banner

Briney Tooling Systems is the leading supplier of CNC tool holders and shrink fit tooling systems in North America. Every tool holder we make is precision engineered with today’s high-speed spindles in mind. Our Tru VelocityTM tools can run up to 20,000 RPM without putting undue stress on a machine spindle and our Maximum VelocityTM tooling is balanced to 2.5 G or better at 30,000 RPM. This specification will meet or exceed the spindle balance specification for all machine tool builders.

This precision means you will get 100% longer tool life out of our shrink fit tool holders. It also means less down time for change outs, less spindle wear, optimum speeds and feed rates, and lower overall life cycle operating cost.

The HSK connection is the internationally recognized standard for superior high-speed tool holder performance. Briney combines the HSK connection with improved materials and processes to provide the highest quality HSK tool holders in the industry. These improvements, in addition to a specialized heat treat process, produce tool holders with 100% longer tool life than our competitors.

HSK



Contact Us

700 E Soper Road
Bad Axe, MI 48413
Phone: (800) 752-8035
Fax: (989) 269-9559
briney@geminigroup.net

50-52 Corey Ln, Mendham, NJ 07945, USA

Header

Get Current Price and Availability for CHUCK JAWS using USST part numbers

THE LARGEST VARIETY OF CHUCK JAWS IN THE USA! - Use your VISA or MASTERCARD to Order Online at www.USSTEXPRESS.COM

101130

Click Here to Watch Video

1-800-243-7701
sales@usshoptools.com

88 Clinton Road, Fairfield, NJ 07004, USA

briney-banner

Briney Tooling Systems is the leading supplier of CNC tool holders and shrink fit tooling systems in North America. Every tool holder we make is precision engineered with today’s high-speed spindles in mind. Our Tru VelocityTM tools can run up to 20,000 RPM without putting undue stress on a machine spindle and our Maximum VelocityTM tooling is balanced to 2.5 G or better at 30,000 RPM. This specification will meet or exceed the spindle balance specification for all machine tool builders.

This precision means you will get 100% longer tool life out of our shrink fit tool holders. It also means less down time for change outs, less spindle wear, optimum speeds and feed rates, and lower overall life cycle operating cost.

A collet chuck is a superior choice to a three-jaw chuck in terms of consistency, repeatability, higher speeds, and longer tool life. Briney BR/ER collet chucks are balanced to 2.5 G at 20,000 RPM, concentric .0002” shank-to-bore.

BR_Collet_Chuck



Contact Us

700 E Soper Road
Bad Axe, MI 48413
Phone: (800) 752-8035
Fax: (989) 269-9559
briney@geminigroup.net

28 Schoolhouse Ln, Morristown, NJ 07960, USA

Header

Get Current Price and Availability for CHUCK JAWS using USST part numbers

THE LARGEST VARIETY OF CHUCK JAWS IN THE USA! - Use your VISA or MASTERCARD to Order Online at www.USSTEXPRESS.COM

101120

Click Here to Watch Video

1-800-243-7701
sales@usshoptools.com

381 E Randolph Ave, Mine Hill Township, NJ 07803, USA

Header

Get Current Price and Availability for CHUCK JAWS using USST part numbers

THE LARGEST VARIETY OF CHUCK JAWS IN THE USA! - Use your VISA or MASTERCARD to Order Online at www.USSTEXPRESS.COM

101070

Click Here to Watch Video

1-800-243-7701
sales@usshoptools.com

20 Tingley Rd, Morristown, NJ 07960, USA

Header Get Current Price and Availability for CHUCK JAWS using USST part numbers

THE LARGEST VARIETY OF CHUCK JAWS IN THE USA! - Use your VISA or MASTERCARD to Order Online at www.USSTEXPRESS.COM

101050

Click Here to Watch Video

1-800-243-7701
sales@usshoptools.com

200 U.S. 46, Parsippany, NJ 07054, USA

cooling

20-34 Beaufort Ave, Dover, NJ 07801, USA

Header

Get Current Price and Availability for CHUCK JAWS using USST part numbers

THE LARGEST VARIETY OF CHUCK JAWS IN THE USA! - Use your VISA or MASTERCARD to Order Online at www.USSTEXPRESS.COM

101042

Click Here to Watch Video

1-800-243-7701
sales@usshoptools.com

29-31 Sagamore Road, Parsippany, NJ 07054, USA

briney-banner

Briney Tooling Systems is the leading supplier of CNC tool holders and shrink fit tooling systems in North America. Every tool holder we make is precision engineered with today’s high-speed spindles in mind. Our Tru VelocityTM tools can run up to 20,000 RPM without putting undue stress on a machine spindle and our Maximum VelocityTM tooling is balanced to 2.5 G or better at 30,000 RPM. This specification will meet or exceed the spindle balance specification for all machine tool builders.

This precision means you will get 100% longer tool life out of our shrink fit tool holders. It also means less down time for change outs, less spindle wear, optimum speeds and feed rates, and lower overall life cycle operating cost.

Custom and special tool holders account for over one-third of all the products we ship. So if you can’t find a tool holder to match your exact requirements in our existing inventory, you can be assured we have the expertise to manufacture your custom tool holder to the same high quality standard as the rest of our products.

Custom_Applications



Contact Us

700 E Soper Road
Bad Axe, MI 48413
Phone: (800) 752-8035
Fax: (989) 269-9559
briney@geminigroup.net

372 Park Avenue, East Orange, NJ 07017, USA

briney-banner

Briney Tooling Systems is the leading supplier of CNC tool holders and shrink fit tooling systems in North America. Every tool holder we make is precision engineered with today’s high-speed spindles in mind. Our Tru VelocityTM tools can run up to 20,000 RPM without putting undue stress on a machine spindle and our Maximum VelocityTM tooling is balanced to 2.5 G or better at 30,000 RPM. This specification will meet or exceed the spindle balance specification for all machine tool builders.

This precision means you will get 100% longer tool life out of our shrink fit tool holders. It also means less down time for change outs, less spindle wear, optimum speeds and feed rates, and lower overall life cycle operating cost.

Every NMTB tool holder Briney makes is manufactured in the USA from Certified 8620 material and production quality is ensured through ISO 9001:2008 policies. 50% deeper case depth than the competition mean you get longer life out of our tool holders and decreased operating costs.



Contact Us

700 E Soper Road
Bad Axe, MI 48413
Phone: (800) 752-8035
Fax: (989) 269-9559
briney@geminigroup.net

87 Brookline Avenue, Nutley, NJ 07110, USA

briney-banner

Briney Tooling Systems is the leading supplier of CNC tool holders and shrink fit tooling systems in North America. Every tool holder we make is precision engineered with today’s high-speed spindles in mind. Our Tru VelocityTM tools can run up to 20,000 RPM without putting undue stress on a machine spindle and our Maximum VelocityTM tooling is balanced to 2.5 G or better at 30,000 RPM. This specification will meet or exceed the spindle balance specification for all machine tool builders.

This precision means you will get 100% longer tool life out of our shrink fit tool holders. It also means less down time for change outs, less spindle wear, optimum speeds and feed rates, and lower overall life cycle operating cost.

Shrinker shrink fit chucks provide an optimal connection between the holder and the tool shank by utilizing the thermal expansion properties of the shrink fit tool holder. This clamping system is an economical solution that provides maximum clamping force and rigidity while dramatically increases tool life. In fact, you can count on 100% longer life from our shrink fit tool holders over conventional tooling.

Shrink_Fit



Contact Us

700 E Soper Road
Bad Axe, MI 48413
Phone: (800) 752-8035
Fax: (989) 269-9559
briney@geminigroup.net

80 Old Brookside Rd, Randolph, NJ 07869, USA

Header

Get Current Price and Availability for CHUCK JAWS using USST part numbers

THE LARGEST VARIETY OF CHUCK JAWS IN THE USA! - Use your VISA or MASTERCARD to Order Online at www.USSTEXPRESS.COM

101080

Click Here to Watch Video

1-800-243-7701
sales@usshoptools.com

9 Bridge Ave, Chatham Township, NJ 07928, USA

onelogo11

 

 

 

 

 

Quality FORM Tools(QFT) was created to offer customers competitive pricing within a single vendor source. We are always pursuing new opportunities to find qualified, reliable, vendors as well as developing new business relationships with the same type of customers. Our customers can also deal direct with any one of our suppliers they so choose, once a business relationship is established.

Quality Form Tools | CNC Machining | Stamping & Forming | Nationwide Service | High Volume Part Production

Quality Form Tools is presently offering services in Hammond Indiana from a growing multitude of different Cold Header Tooling/Machine Part Manufacturers, Tool & Die, General Machining & Fabrication, Job shops/Production/Specialty shops, each of which has at least 30+ years experience in their respective fields of expertise. The majority of our vendors specialize in serving the Hot/Cold Wire & Fastener Forming Industry. In addition to this industry, Quality Form Tools also serves the Stamping, Processing and Alternative Energy Industries.

Quality FORM Tools

2649 Cleveland St.
Hammond, IN 46323
Ph: 877-DO U-FORM (368-3676)
Fx: 855-Y FO-RM IT (936-7648)
formtools@live.com

71 Ridge Drive, Livingston, NJ 07039, USA

briney-banner

Briney Tooling Systems is the leading supplier of CNC tool holders and shrink fit tooling systems in North America. Every tool holder we make is precision engineered with today’s high-speed spindles in mind. Our Tru VelocityTM tools can run up to 20,000 RPM without putting undue stress on a machine spindle and our Maximum VelocityTM tooling is balanced to 2.5 G or better at 30,000 RPM. This specification will meet or exceed the spindle balance specification for all machine tool builders.

This precision means you will get 100% longer tool life out of our shrink fit tool holders. It also means less down time for change outs, less spindle wear, optimum speeds and feed rates, and lower overall life cycle operating cost.

Every CAT tool holder Briney makes is manufactured in the USA from Certified material and production quality is ensured through ISO 9001:2008 policies. Our Tru Velocity™ tools can run up to 20,000 RPM without putting undue stress on machine spindles and our Maximum Velocity™ tooling is balanced to 2.5 G or better at 30,000 RPM. Exceptional balance and 50% deeper case depths than our competition mean you get 100% more life out of your tool holders.

CAT



Contact Us

700 E Soper Road
Bad Axe, MI 48413
Phone: (800) 752-8035
Fax: (989) 269-9559
briney@geminigroup.net

4 Schooner Lane, Port Washington, NY 11050, USA

carmex_banner

Carmex Precision Tools Ltd. is a leading manufacturer of high quality cutting tools. Carmex specialize in the production of threading tools for turning and milling. Our product lines include Thread Turning inserts and toolholders, Mill Thread inserts and tool holders, Mill-Thread Solid Carbide and Spiral Mill Thread.

The grooving inserts are a combination of ground profile and sintered chip-breaker.

  • Same toolholder for grooving and threading.
  • Minimum investment in tooling.
  • Three cutting edges.
  • Precision ground.
  • Improved chip control.
  • Also available for Snap Ring grooves.

12      Machines_Tooling_webart_125x125

 

Please visit our booth

West Building -W-1480

Click Here to Watch Video

Contact Us

Address: 2075 Highway 175

Richfield, WI 53076

Phone: 262-628-5030

E-Mail: Sales@CarmexUSA.com

50 South Rd, Mendham, NJ 07945, USA

Header

Get Current Price and Availability for CHUCK JAWS using USST part numbers

THE LARGEST VARIETY OF CHUCK JAWS IN THE USA! - Use your VISA or MASTERCARD to Order Online at www.USSTEXPRESS.COM

101100

Click Here to Watch Video

1-800-243-7701
sales@usshoptools.com

Showing 1 - 20 of 42 results