ITA
133 S Northampton St, Bangor, PA 18013, USA

ITA_NEW

Since 1992, ITA has been supplying superior products to the metal working industry and helping our customers find solutions to their needs while keeping costs down.

One of the things that sets us apart from other suppliers is our customer service philosophy. We find that you usually realize just how important good customer service is when you're not receiving it. When you call us, you will connect with a live person who will direct your call to the individual who can best assist you with your immediate needs.

We understand many of our customers strive to find ways to reduce costs and increase profitability. We assist our customers with this challenge by providing high quality, innovative and cost effective solutions to their manufacturing applications.

ITA stocks non-woven filter media for coolant filtration applications in the machining industry. Non-wovens are an economical and versatile alternative to woven fabrics in many applications. Non-wovens are appropriate for coolant filtration applications because they are lightweight, strong, have good chemical resistance and are an excellent value for the dollar. Our filter fabric media offers excellent filtration characteristics, reduces tramp oil and is very competitively priced.

ITA carries a large inventory of different widths, lengths and a wide range of filtration ratings.

A few typical applications for our various types of filter media include:

Centerless grinding Cylindrical grinding Roll grinding Surface grinding Filter Rolls Belt grinding Double disc grinding Honing Many metal working and industrial processes.

Click here to read news



filter-fabric

ITA, Inc.
P.O. Box 1606
Berlin, Maryland 21811
Phone Number: 410-777-8555

71 Mountain Rd, Oxford, NJ 07863, USA

logo2

About The EZ-Puller

The Ez-Puller came about because of the frustration and time wasted setting up and fine-tuning traditional bar pullers that were available to me a few years ago. We are a job-shop machine shop and our lathe work is often short run 5-10-50 or 100 pieces. In most cases, the short run nature of the job does not warrant setting up one of these traditional bar pullers – it takes too much time. However, doing things this way meant we had to put an operator in front of the machine to manually pull the bar after each part was completed. To me this was lost production, I needed a bar puller that could be set up for any bar diameter – within the range of the tool – in seconds. The tool needed to be reliable, repeatable and rugged enough to stand up to the probability 100’s of thousands if not millions of pulls.

A few prototypes and a few modifications later, I had this neat little tool that does exactly what I wanted it to and even more. The Ez-Puller can pull not only round but octagon, hex and square stock – without spindle orientation (M19). We have also found that when we install a softer spring (60A or 80A durometer) we can pull PTFE and other delicate materials without damaging the stock.

Please take a few minutes to watch the video. Then take a moment to read our warranty. We stand behind what We build.

Thank you, Dan Kenner

INTRODUCTORY PRICE $595 (Normal Price $725)
EZ-PULLER EP12044VERY USER FRIENDLY
NO MECHANICAL ADJUSTMENT NECESSARY
(X axis end point gets changed in the program when changing bar diameters)
ONE TIME SETUP
NEVER NEEDS ADJUSTMENT

EZ-PULLER1-571x1024 (1)

Click Here to Watch Video

Accudyne Products
2835 S. Raritan St
Englewood, CO 80110 US
Phone: 303.991.1500
Fx: 303.991.1921
dan@ezpullerusa.com

50-52 Corey Ln, Mendham, NJ 07945, USA

Header

Get Current Price and Availability for CHUCK JAWS using USST part numbers

THE LARGEST VARIETY OF CHUCK JAWS IN THE USA! - Use your VISA or MASTERCARD to Order Online at www.USSTEXPRESS.COM

101130

Click Here to Watch Video

1-800-243-7701
sales@usshoptools.com

381 E Randolph Ave, Mine Hill Township, NJ 07803, USA

Header

Get Current Price and Availability for CHUCK JAWS using USST part numbers

THE LARGEST VARIETY OF CHUCK JAWS IN THE USA! - Use your VISA or MASTERCARD to Order Online at www.USSTEXPRESS.COM

101070

Click Here to Watch Video

1-800-243-7701
sales@usshoptools.com

45 Petersburg Rd, Hackettstown, NJ 07840, USA

hemiteclogotop_0

Precision as Principle

Heimatec is a world leader in the development and manufacturing of live tools, angle heads and multi-spindle drill heads. With U.S. head quarters located in the Chicagoland area and company head quarters and manufacturing in Renchen Germany, we are dedicated to supplying our customers the most innovative tooling technology possible.

Our Tools are all manufactured to meet today’s DIN standards. This complements the high quality manufacturing systems in the market place and helps to produce the highest precision work pieces. “Quality tools produce quality parts!”

VDI700

Click Here to Watch Video

Heimatec Inc.
16 E. Piper Lane Suite 129
Prospect Heights, IL 60070
(847) 749-0633
info@heimatecinc.com

9-21 Wilbur Avenue, Lake Hiawatha, NJ 07034, USA

logo

Federal Knife’s precision blade sharpening services assure competitive pricing for precision regrinding and refinishing to OEM standards.

Federal Knife offers metal cutting shear blades and slitter blades for most machines makes and models including, Cincinnati, Accur-Shear, Wysong & Miles, Betenbender, Niagara, Standard, Pexto, Amada, American Hercules, Atlantic, Pacific, Pearson, Gatti, Gary, Yoder, Welty-Way, Sleer, Iowa Precision, Stamco, Wean, HFW, Shinko, Reika-Werk and others.

fki-metal-slitter

Contact Us:

785 County Line Rd PO Box 509 Palmyra, IN. 47164 sales@federalknife.com (800) 235-KNIFE (812) 364-1418

Interstate 280, East Hanover, NJ 07936, USA

briney-banner

Briney Tooling Systems is the leading supplier of CNC tool holders and shrink fit tooling systems in North America. Every tool holder we make is precision engineered with today’s high-speed spindles in mind. Our Tru VelocityTM tools can run up to 20,000 RPM without putting undue stress on a machine spindle and our Maximum VelocityTM tooling is balanced to 2.5 G or better at 30,000 RPM. This specification will meet or exceed the spindle balance specification for all machine tool builders.

This precision means you will get 100% longer tool life out of our shrink fit tool holders. It also means less down time for change outs, less spindle wear, optimum speeds and feed rates, and lower overall life cycle operating cost.

Induction_Units

Contact Us

700 E Soper Road Bad Axe, MI 48413 Phone: (800) 752-8035 Fax: (989) 269-9559 briney@geminigroup.net

3-5 Blue Grass Ln, Hackettstown, NJ 07840, USA

hemiteclogotop_0

Precision as Principle

Heimatec is a world leader in the development and manufacturing of live tools, angle heads and multi-spindle drill heads. With U.S. head quarters located in the Chicagoland area and company head quarters and manufacturing in Renchen Germany, we are dedicated to supplying our customers the most innovative tooling technology possible.

Through use of our special clamping screw, our easy-quick HT system offers comfortable handling. All adapters can be changed within seconds with the highest available precision.

Print

Click Here to Watch Video

Heimatec Inc.
16 E. Piper Lane Suite 129
Prospect Heights, IL 60070
(847) 749-0633
info@heimatecinc.com

310 NJ-10, Succasunna, NJ 07876, USA

logo

One Operation - For Front and Back Deburring, Chamfering, Drilling and Countersinking

As the industry leader, HEULE manufactures the highest quality, most reliable cutting tools designed to give you a superior finished part off the machine. You can find HEULE tools in some of the world's largest manufacturers and the smallest machine shops.

HEULE offers local inventory and engineering support for quick delivery and outstanding customer service to the United States, Canada, and Mexico.

image001

Heule Tool Corporation
131 Commerce Drive
Loveland, Ohio 45140
Email: info@heuletool.com
http://www.heuletool.com

111 Gold Mine Rd, Flanders, NJ 07836, USA

Trun-Logo

Stan and Toni Martin owners of Martin Manufacturing developed the Trunnion Tables to increase productivity and profits. Our fixtures are tailored to your needs. Because we understand that job come and go and the key to profits is quick in and out turn around time with minimal handling.

Quick change Fixture. Less than 60 Second change over. The Quick Change feature provides the ultimate in flexibility with .0005 Repeatability. The Quick Change Trunnion Fixture is available in custom sizes for any brand indexer and center height.

Read More

qc_main


Click Here to Watch Video

Martin Machining Svc Inc
602 Main St
Elsmere, KY 41018
Stan Martin: Owner / Sales
Toni Martin: Accounting / Office Manager
859-727-9900

ITA
204 Stephen Jackson Rd, Pen Argyl, PA 18072, USA

ITA_NEW

Since 1992, ITA has been supplying superior products to the metal working industry and helping our customers find solutions to their needs while keeping costs down.

One of the things that sets us apart from other suppliers is our customer service philosophy. We find that you usually realize just how important good customer service is when you're not receiving it. When you call us, you will connect with a live person who will direct your call to the individual who can best assist you with your immediate needs.

We understand many of our customers strive to find ways to reduce costs and increase profitability. We assist our customers with this challenge by providing high quality, innovative and cost effective solutions to their manufacturing applications.

Live Centers, Dead Centers & Face Drivers

PTM is a leading manufacturer of standard and custom designed workholding products.

PTM offers a wide variety of products with emphasis on Live Centers, Dead Centers and Face Drivers for Turning, Grinding and Gear Cutting. PTM has established its reputation and achieved its success by offering products that ensure best performance, highest accuracy and longest life while keeping prices low.

Click here to read news



dead-centers

ITA, Inc.
P.O. Box 1606
Berlin, Maryland 21811
Phone Number: 410-777-8555

200 U.S. 46, Parsippany, NJ 07054, USA

cooling

KHK
11 Rose Ln, Hackettstown, NJ 07840, USA

KHK-logo

Presidents Message


Founded in 1935, Kohara Gear Industry Co., Ltd. is a leading manufacturer of gearing in Japan. Having been a company solely devoted to the manufacture of gears for 80 years, Kohara Gear Industry is world renowned for their KHK brand of gears. In 2005, KHK completely rebuilt their headquarters and factory location in Kawaguchi Japan to the latest earthquake standards. In 2015, KHK introduced their latest catalog KHK 3013. This catalog contains approximately 175 styles of gears in more than 15,000 configurations.

youtube_promotion

Contact Us

KHK-USA
259 Elm Pl
Mineola, NY 11501
info@khkgears.us
(516) 248-3850

17-19 Phyllis Dr, Succasunna, NJ 07876, USA

Trun-Logo

Stan and Toni Martin owners of Martin Manufacturing developed the Trunnion Tables to increase productivity and profits. Our fixtures are tailored to your needs. Because we understand that job come and go and the key to profits is quick in and out turn around time with minimal handling.

  • 4, 6, 8, 10, 12" square tombstones now available for your VMC
  • Precision machined or ground surface available
  • Guaranteed flatness and parallelism of .001 per 24 inches
  • Plain or Drilled/Tapped with locator bushings
  • All popular vise mounting patterns available
  • Faceplate made to your indexer specifications
  • Outboard support with precision bored bronze sleeve bearing
  • Outboard support made to your indexers centerheight

Martin Machining Svc Inc
602 Main St
Elsmere, KY 41018
Stan Martin: Owner / Sales
Toni Martin: Accounting / Office Manager
859-727-9900

111 Hook Mountain Road, Montville, NJ 07045, USA

briney-banner

Briney Tooling Systems is the leading supplier of CNC tool holders and shrink fit tooling systems in North America. Every tool holder we make is precision engineered with today’s high-speed spindles in mind. Our Tru VelocityTM tools can run up to 20,000 RPM without putting undue stress on a machine spindle and our Maximum VelocityTM tooling is balanced to 2.5 G or better at 30,000 RPM. This specification will meet or exceed the spindle balance specification for all machine tool builders.

The holding mechanism used in tapping systems differs from that of any other tool style in that a tap will have a square machined on the rear of the shank. The square on the tap shank will mount in to the tap collet or chuck depending on the type of holder used.

Tapping_Systems



Contact Us

700 E Soper Road
Bad Axe, MI 48413
Phone: (800) 752-8035
Fax: (989) 269-9559
briney@geminigroup.net

49 Railroad Ave, Kenvil, NJ 07847, USA

ClampriteLogo

The most economical tool for spindle drawbar testing!

No batteries or clumsy extension cords, no delicate electronics to adjust or burn out, and Clamprite Gages are designed for years of daily use in the shop environment.

Get a Clamprite Gage and find out if your spindles can still Clamprite!

All Gage Kits include a Certificate of Accuracy traceable to NIST

Clamprite offers free periodic inspection for accuracy for as long as you own your gage!

Made in USA

Drawbar Force Gage

Clamprite, LLC
38 Cygnet Drive
Carson City, NV 89706

Email: jerome@clamprite.com
Phone: (775) 246-5100

88 Clinton Road, Fairfield, NJ 07004, USA

briney-banner

Briney Tooling Systems is the leading supplier of CNC tool holders and shrink fit tooling systems in North America. Every tool holder we make is precision engineered with today’s high-speed spindles in mind. Our Tru VelocityTM tools can run up to 20,000 RPM without putting undue stress on a machine spindle and our Maximum VelocityTM tooling is balanced to 2.5 G or better at 30,000 RPM. This specification will meet or exceed the spindle balance specification for all machine tool builders.

This precision means you will get 100% longer tool life out of our shrink fit tool holders. It also means less down time for change outs, less spindle wear, optimum speeds and feed rates, and lower overall life cycle operating cost.

A collet chuck is a superior choice to a three-jaw chuck in terms of consistency, repeatability, higher speeds, and longer tool life. Briney BR/ER collet chucks are balanced to 2.5 G at 20,000 RPM, concentric .0002” shank-to-bore.

BR_Collet_Chuck



Contact Us

700 E Soper Road
Bad Axe, MI 48413
Phone: (800) 752-8035
Fax: (989) 269-9559
briney@geminigroup.net

20 Tuxedo Drive, Livingston, NJ 07039, USA

ihp

20 Island Rd, Great Meadows, NJ 07838, USA

hemiteclogotop_0

Precision as Principle

Heimatec is a world leader in the development and manufacturing of live tools, angle heads and multi-spindle drill heads. With U.S. head quarters located in the Chicagoland area and company head quarters and manufacturing in Renchen Germany, we are dedicated to supplying our customers the most innovative tooling technology possible.

Forget everything you knew about quick change systems. Now there is u-tec - the new dimension in machining! Be assured: With the introduction of u-tec in the market a new era is dawning.

Print

Click Here to Watch Video

Heimatec Inc.
16 E. Piper Lane Suite 129
Prospect Heights, IL 60070
(847) 749-0633
info@heimatecinc.com

30 Flanders Road, Budd Lake, NJ 07828, USA

carmex_banner

Carmex Precision Tools Ltd. is a leading manufacturer of high quality cutting tools. Carmex specialize in the production of threading tools for turning and milling. Our product lines include Thread Turning inserts and toolholders, Mill Thread inserts and tool holders, Mill-Thread Solid Carbide and Spiral Mill Thread.

Contact Us


Address: 2075 Highway 175

Richfield, WI 53076
Phone: 262-628-5030
E-Mail: Sales@CarmexUSA.com

Showing 1 - 20 of 87 results